Best 3D printers of 2020: Find the right printer for your business needs

3D printers have come a long way in the past few years. 

Initially relegated to large industrial processes, they experienced a bit of a boom in the mid-2010s, when the technology became affordable to small offices, design firms, and hobbyists. Since then, 3D printers have evolved along with a number of vectors. Low cost, high-resolution resin printers have joined filament-based (or FDM) printers in the home and hobbyist market. Printers with large print areas have become available at both the low and high end, with lower-end printers optimizing for the very basic heated plates needed for large prints, while the higher-end solutions add sealed chambers, temperature management, and cameras. Printers with dual extruders are becoming more common, and the slicing software needed to prepare prints is becoming more sophisticated. We’re also starting to see more full color and metal printing.

In this guide, we award best-of-show for a range of printer categories. We’re spotlighting the machines based on where they’re best used. We’re starting with the most expensive offerings and ending with our favorite under-$200 printer. 

Disclosure: ZDNet may earn an affiliate commission from some of the products featured on this page. ZDNet and the author were not compensated for this independent review.

Best exotic plastics industrial printer

stratasys-fortus-450mc.png

Stratasys

Stratasys is a well-known name in the industrial 3D printing space, and Fortus 450MC has been around for a while. So while it’s not the most recently introduced 3D printer, this $100K+ printer makes its place on our list because its fully-enclosed 406 x 355 x 406 mm print area can reliably produce carbon fiber, nylon, carbon fiber-infused nylon, and advanced resin-based filament night and day, without breaking a sweat.

If you’re building prototypes you intend to use rather than just show off, this printer can produce tough parts with tight tolerances for use in industrial applications. Our friends at Fargo 3D Printer Repair tell us, “Overall a solid machine from a reputable company, we like the additional size of the 450mc over the 380mc.”

View Now at Stratasys.com

Best office-sized metal printer

desktop-metal-studio-system.png

Desktop Metal

Most 3D printers melt or fuse plastic to produce 3D objects. The Desktop Metal Studio System+ is a fascinating offering because it can produce 3D metallic parts made of steel, aluminum, copper, and even titanium. Physically, the machine can fit onto a desk or a workbench and doesn’t require an entire factory environment to create prototypes the company says are the equivalent in strength and characteristics as injection molded parts.

There’s some serious materials science going on here. Using a process called Bound Metal Deposition, the printer uses bound metal rods that are analogous to filament in FDM plastic printers. The source material contains a mix of metal, wax, and polymer binders, which allows the object to be printed on the build plate. Once the object has been printed, it needs to be placed into a tank where a solution dissolves the primary binding agent and creating a series of open channels within the object. The final stage of post-processing involves the use of a sintering furnace, which heats the finished object to a point before liquefaction, causing the object to become a solid mass.

What intrigues us most is the office setting this printer can function in. The company says there’s no need for respirators or external ventilation, which means this $120,000 device can coexist in a design environment without special environmental accommodations.

View Now at Desktop Metal

Best industrial 3D printer for flexible objects

sindoh-3dwox-7x.jpg

Sindoh

With the ability to extrude layers as fine as 0.5mm, the 7X is quite capable of fine detail. We didn’t award it our best-for-fine-detail 3D printing prize because the Formlabs Form 3 (see below) can produce even finer resolutions. Where the 7X really shines, however, is its rock-solid reliability when it comes to producing flexible parts. Because it supports direct extrusion (rather than bowden-style), the filament has little opportunity to bind up before being laid down on the print bed.

At approximately $15,000, this is a large format printer, with a build area of 370 x 390 x 450mm. It supports Ethernet and wireless connectivity and uses filament print cartridges that allow for easy swapping of filament without the hassle of fighting with the extruder. Our friends at Fargo 3D Printer Repair tell us, “A fantastic printer for flexibles and fine detail work.”

View Now at Sindoh

Best four-head industrial 3D printer

stacker-s4-industrial.jpg

Stacker 3D

The product’s name says it: The $10,999 Stacker S4 is an industrial-grade 3D printer with the ability to print huge prints and use up to four extruders at once. The build plate is an absolutely enormous 345 x 520 and you can print objects as tall as 650 mm (that’s more than 25-inches for those of us more familiar with imperial measurements).

But the stand-out feature of this made-in-America printer is the four print heads. It’s possible to print with 1, 2, 3, or all four print heads, and if you print with fewer heads, you can remove them to increase the overall build area. This allows for tremendous low-volume production gains and manufacturing efficiencies. Our friends at Fargo 3D Printer Repair tell us, “This printer’s multi head capabilities are fantastic for a wide variety of uses depending on the application.”

View Now at Stacker 3D

Best fully-enclosed, filtered large format printer

bcn3d-epsilon.jpg

BCN3D

The BCN3D Epsilon is an industrial-level plastic FDM printer designed for heavy production use and additive manufacturing. Priced at 6,995€ (about $7,650 at the current exchange rate), the machine has an enormous 420 x 300 x 400mm build area. Normally, it’s difficult to 3D print parts this large because the temperature variations from the center to the edges tend to cause warping and layer failure. But because the BCN3D Epsilon has a fully-enclosed build area, it’s able to maintain even heat throughout the build process, substantially increasing the reliability and predictability of large part printing.

What makes this product a standout is not that it has two extruders. Other best-of-show products we’re spotlighting do as well. Instead, it’s the company’s Independent Dual Extrusion System (or IDEX) printing technology, which allows both extruders to work independently of each other. The printer has duplication and mirror modes where two identical (or mirrored) objects can be extruded simultaneously. The printer is capable of printing a wide range of industrial-grade materials developed by BASF and Mitsubishi Chemical. It also has HEPA and carbon filters, so the printer can be safely used either in an office environment or on a factory floor.

View Now at BCN3D

Best large format dual-extruder professional printer

ultimaker-s5.jpg

Ultimaker

There’s a lot to like about the $6,000 flagship Ultimaker with its 330 x 240 x 300 mm build volume. Although the entire build chamber isn’t sealed, the S5’s glass front doors seals in quite a bit of the heat, contributing to excellent print quality every time. You can also get two add-ons that fully heat seal the S5 – an enclosed cover and a filament feeding system that protects a small library of filament spools as they feed in from the bottom of the machine.

Also: Is the Ultimaker S5 the ultimate Ultimaker 3D printer?

My favorite aspect of the S5 is how easy it is to load filament. The filament feed system simply slots open, you feed in your filament, and close the latch. It’s rock-solid reliable and virtually zero hassle. The S5 comes with a heated bed, it auto-trams by testing a grid of points along the bed surface, has a dual extruder system with removable and customizable print heads and has a built-in camera. You can control one or a fleet of Ultimaker either via Ethernet or wirelessly via Ultimaker’s Cura slicer and printer control environment. I often transfer models straight from my Fusion 360 computer-aided design environment right to the Ultimaker, which saves both time and steps. This is an ideal machine for rapid prototyping and low-volume manufacturing.

View Now at Amazon

Best printer redesign

makerbot-method.png

MakerBot

MakerBot — a pioneer in desktop 3D printers — has had its ups and downs over the years. The very first 3D printer I ever used was a MakerBot Replicator 5th Generation. A few years later, the redesigned Replicator+ arrived in my testing lab – and disappointed. It took the company more than a year to get their software house in order and bring the Replicator+ back to the standard of their previous machines.

Also: Is MakerBot’s new Method 3D printer ready enough to save the company?

Since then, the company has been hard at work on an all-new printer: the Method. This printer has a full-enclosed, climate-controlled heated print area, sealed and climate-controlled filament storage, a redesigned extruder, and an onboard camera. What’s more, the company seems to have learned from its rushed release of the Replicator+. The Method has had more than a year of testing before it’s being released into the market. At $4,999, MakerBot bills the Method as a manufacturing and prototyping workstation. The Method can maintain a chamber temperature of 60°C. The new Method X model can maintain a chamber temperature of 100°C, allowing for reliable printing of more exotic and troublesome filament types.

View Now at B&H

Best full-color CMYK printer

da-vinci-color.png

XYZprinting

Most 3D printers lay down plastic in a single color, from a roll of filament. A few add an extruder for dual-filament printing. But the XYZprinting da Vinci Color allows you to print full-color 3D objects for about $3,500.

The da Vinci Color is essentially two printers in one: an FDM filament printer and an inkjet printer. The way it works is that after each layer of filament is extruded, the CMYK inkjet prints on top of the extruded filament, in much the same way a typical inkjet would print on paper. The result, after the model is complete, is a full-color object – without the need for custom painting. It’s not perfect: colors are a little washed out. But for the price, the ability to produce full-color prints is amazing.

View Now at Amazon

Best industrial-quality fine-detail desktop 3D resin printer

formlabs-form-3.jpg

Formlabs

The $3,599 Form 3 is the latest generation of Formlabs well-respected resin printers. The Form 3 uses a laser to solidify resin with a high degree of accuracy and reliability. It also has a flexible imaging surface, which helps minimize the adherence problems often common to SLA resin printers. The Form 3 can be controlled via Wi-Fi or Ethernet and the company’s software allows for the central management of a full fleet of printers. The precision of this machine is mind-blowing. With an X/Y precision of 25 microns and a layer height that as fine as 25 microns, you can’t see layer lines, period.

But what we like best about the Form 3 SLA printer (and the earlier Form 2) is the resin cartridge and post-processing system offered by Formlabs. Resin printing is generally an unpleasant task, requiring a great deal of attention is spent to avoid coming in contact with toxic resins. Rather than pouring resin into an open vat, users of the Form 3 merely insert a resin cartridge (like a big ink cartridge) and start printing. Formlabs also offers a post-processing 3D printing system consisting of a cleaner and UV chamber, both of which are automated, making post-processing a mostly hands-off process.

View Now at Formlabs

Best built-like-a-tank printer series

lulzbot.jpg

Aleph Objects

When it comes to a best-of selection of 3D printers, one brand always comes to mind: LulzBot. Although Aleph Objects, the company that produces LulzBot printers, has had some financial troubles of late, it seems to have resolved them. That’s good because LulzBots are fantastic printers. My nominee has to the LulzBot Mini 2, which has been my personal go-to small form-factor printer since it replaced the LulzBot Mini, which I’ve used for years. Both models are built like a tank and have never failed to produce high-quality prints.

Also: 3D printing hands-on: LulzBot Mini 2 first look

Our friends at Fargo 3D Printer Repair recommend the LulzBot TAZ Pro, “Our favorite printer in this lineup, the LulzBot TAZ Pro does great with both holding tolerances due to backlash compensation and has excellent multi-material capabilities. Our go-to for printing with water-soluble filaments or fine multi-material work.” They also speak very highly of the LulzBot TAZ WorkHorse, which they describe as “a printer that operates lights-out. A favorite of business owners, military, and teachers across the globe due to its robust and very adaptable frame, a variety of tool heads available, and strong user community.”

View Now at Amazon

Best all-around hobby printer under $1,000

original-prusa-i3-mk3s.jpg

Prusa Research

You can’t fully appreciate the Original Prusa i3 MK3S without knowing the story of Josef Průša, a Czech maker and inventor. Průša was an active participant in the open-source RepRap community back in the early hobbyist 3D printing days. He designed two upgraded Mendel printers, each time simplifying the design and improving reliability. His last hobby project was the i3, a substantial improvement on earlier designs. Based on the i3 (which has been cloned by many companies around the world), Průša began producing parts for hobbyists to buy and assemble. And thus was born the original Original Prusa i3.

Fast forward nearly a decade and Prusa Research is one of the fastest-growing tech companies in Central Europe and the Original Prusa i3 series (which has had three major design iterations) and in 2016 was the most-used 3D printer in the world. What we like about the i3 MK3S is how reliable and robust it is, how smartly the device trams the build plate, and how inexpensive the machine is for all it does. Fully-assembled, the Original Prusa i3 MK3S is $999, but those with a little more time on their hands and a hankering for adventure, there’s a $749 kit if you’re willing to assemble it yourself.

View Now at Prusa Research

Best medium-sized budget printer under $300

creality-ender-3-pro.jpg

Shenzhen Creality 3D Technology Co., Ltd.

Creality has made quite a name for themselves over the past five years, producing very capable printers at low prices. You may recall that I reviewed the Creality CR-10 and CR-10 Mini and both are still in operation in the Fab Lab to this day.

But if you want an inexpensive 3D printer and are willing to do a little fiddling, nothing beats the Creality Ender 3. Our friends at Fargo 3D Printer Repair tell us, “This printer is infinitely moddable, but does require a lot of patience in the beginning for set up and tuning.

The Ender 3 isn’t a great place to start for beginners due to this setup, but it is a fantastic budget buy.”

View Now at Amazon

Best 3D printer under $200

monoprice-mp-select-mini-v2.jpg

Monoprice

Let’s be clear. There are a lot of under-$200 3D printers on the market now. But cheap doesn’t necessarily mean safe. Nearly all of the under $200 printers cut corners, usually in terms of build quality and the safety of their high-voltage components. Most of these printers are built for international markets and are not subject to US-based consumer safety regulations.

And then there’s the Monoprice MP Select Mini V2. This is a robust, well-built little printer. It is definitely on the tiny side for FDM printers, with a build volume of only 120 x 120 x 120 mm. That said, it works, it’s reliable, it’s hackable, it’s very inexpensive, and it’s safe. For the price, that’s a total win and we recommend it wholeheartedly.

View Now at Monoprice

What to buy and how to think about it

So now that you’ve seen our selection of printers, which should you buy? That depends entirely on what you’re doing. If you’re a factory or production shop doing low-volume manufacturing, some of the industrial printers at the top of the list are for you. If you’re a design house, you’ll need to make a price/performance determination and decide if added convenience is worth a few thousand more dollars. If you’re a hobbyist, your choice depends on what you’re making. Makers and tinkerers will like FDM printers, but if you’re a miniature gamer, jewelry designer, or model railroad enthusiast, the resin SLA printers will probably catch your eye.

Also: Everything you need to know about 3D printing and its impact on your business  

Also, a special acknowledgment: While I have a lot of experience with desktop-level 3D printers, I haven’t had much of an opportunity to use industrial 3D printers. So I turned to the folks at Fargo 3D Printer Repair who not only have experience with these printers, but have a daily view into the reliability and failure points for a wide range of printer brands. They were kind enough to take the time to provide us with their recommendations, which I included in the listings above.


You can follow my day-to-day project updates on social media. Be sure to follow me on Twitter at @DavidGewirtz, on Facebook at Facebook.com/DavidGewirtz, on Instagram at Instagram.com/DavidGewirtz, and on YouTube at YouTube.com/DavidGewirtzTV.

ZDNet Recommends

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *